Mitel 8568 - Manual (Page 48)

Call Features
Page 34 Mitel ® 8568 Telephone User Guide – Issue 2, June 2010
Manual Call Forwarding
The following table describes Manual Call Forwarding options.
To use Manual Call Forwarding:
1. Press the Fwd button, and then press one of the menu buttons as described in the table
above, or dial the Manual Call Forwarding feature code from the table above. ENTER
FORWARD DEST appears.
2. Enter the extension number, or press the Outgoing button or the Outgoing access code
(default code is 8), and then dial the phone number. You can press the MESSAGE
CENTER menu button to forward calls to the Message Center (voice mailbox). FWD ALL
CALLS TO <number> appears.
To cancel a Manual Call Forwarding request:
Do one of the following:
• Press the Fwd button, and then press (Speaker), or lift and replace the handset. ANY
CALL FORWARD CANCELED appears.
• Press the Fwd button, and then press the FWD OFF menu button.
System Forwarding
You can use System Forwarding to route calls based on the type of call and the idle or busy
status of your telephone. You cannot program the System Forward destination. You can only
turn it on or off. Contact your system administrator for more information.
To turn System Forwarding on or off:
Dial 354 to turn System Forwarding on. SYSTEM FORWARD ON appears. Dial 354
again to turn System Forwarding off.
Call Forward Feature Description
Code/
Menu Button
Call Forward All Calls All incoming calls are forwarded. 355
ALL
Call Forward if no
Answer All incoming calls are forwarded if not answered.
(The timer is set by the system administrator.) 356
NO ANSWER
Call Forward If Busy When your telephone is busy, all incoming calls
are forwarded without ringing. 357
BUSY
Call Forward If No
Answer/Busy All incoming calls are forwarded if your telephone
is busy, or if you do not answer. 358
NO ANSWER/
BUSY