Monarch Instrument 9493 - Manual (Page 7)

7
P r i n t i n g
Refer to the printer’s documentation for information on loading supplies and
printing.
R e p l a c i n g t h e F u s e
The vehicle mount uses a 10-amp, 125-volt fuse (order part 127983).
The fuse is located on the cable on the right side of the vehicle mount.
To replace it:
1. Push in and twist the fuse holder counterclockwise to open it.
2. Remove the fuse.
3. Insert a new fuse of equal rating. The replacement fuse must have a DC
voltage rating of at least 125 volts.
4 . Place the two halves of the fuse holder together and push in and twist
clockwise to tighten it.
Fuse holder