Miele NOVOTRONIC W 1903 - Manual (Page 30)

Problem solving guide
The “Pre-wash” indicator lamp
flashes.
Start the programme again.
If the indicator still flashes, call the
Miele Service Department.
The “Main wash” indicator
lamp flashes during, or after
the end of a programme.
If this occurs again during the next pro-
gramme, call the Miele Service Depart-
ment.
Despite adequate water sup-
ply pressure, the machine
takes a long time to fill.
Clean the filters in the water inlet sys-
tem as described on page 28.
Large amounts of unused
detergent remain in the dispen-
ser drawer.
Water supply pressure is too low.
Clean the filters as described on
page 28.
Select the “Water plus” option if
necessary.
If using a water softener, pour the
detergent into the dispenser before
adding the water softener.
Fabric softener is not com-
pletely dispensed or water re-
mains in the
p compartment .
The dispenser drawer was opened
while the fabric softener was being
flushed in,
or
The siphon tube is incorrectly posi-
tioned or clogged. Clean as described
on page 25.
Problem solving guide
30