Moxa Technologies UPORT 1130 - Manual (Page 19)

UPort 1100 Series User’s Manual Installation and Configuration
2-10
12. The next window indicates that Windows has completed the installation. Click Finish to
proceed with installation procedure.
13. The Found New Hardware balloon will reappear, indicating that the installation was
successful.
Configuring the COM Port
After the driver and hardware have been successfully installed, the new COM port will have a
COM number and can be accessed and controlled just like your PC’s built-in COM ports. If you
need to change the baud rate, parity, or other COM port settings, you may use your serial
communication application to make those changes. You may also go to Device Manager and
right-click the MOXA USB Serial Port, which will be listed under Ports along with your PC’s
built-in COM ports. In the context menu that pops up, you may select Properties in order to
modify the COM port settings.