MITSUBISHI ELECTRIC WS-48513 - Manual (Page 27)

2-3
Circuit Adjustment Mode
Most of the adjustments can only be performed us-
ing the remote hand unit. See Figure 2-2. Many of
the adjustments must be performed in both the 480i
and 1080i modes. Video/Color adjustments must
be performed in the 480i and 1080i modes, and data
must be preset in the 480P (DVD) and VGA modes.
Note: Set the Remote Operational Mode to
“NetCommand”. (Hold the “Power” button
and press “9-3-5” in sequence.) This slows
the remote’s response and makes adjustments
easier. When adjustments are complete, set
the Remote to its’ original Operational
Mode. (Hold the “Power” button and press
“0-0-0” in sequence)
Activating the Circuit Adjustment Mode
The current signal source determines if the activated
Adjustment Mode is 480i or 1080i.
1. Select the signal source (480i or 1080i).
2. Press the "MENU" button on the remote
control so the Main Menu is displayed.
3. Press the number buttons "0", "3", "5", "7"
in sequence. The screen will change to the
Circuit Adjustment Mode. See Figure 2-3.
Note: Repeat steps 2 and 3 if the circuit ad-
justment mode does not appear on screen.
Figure 2-2: Remote Control
CHASSIS V23
FUNCTION DECODER 1
ADJ ITEM 22 SCNT 16 480i SIGNAL
ABBREV. DATA
Figure 2-3: Circuit Adjustment Mode