Multi-Tech Systems Multi-Tech FaxFinder FF420 - Manual (Page 7)

FaxFinder Cabling Guide
Cabling Process
Place the FaxFinder in a convenient location, and then connect it
to your AC power outlet and Ethernet.
1. Connect FaxFinder to AC Outlet.
Power Cable
Receptacle
LINE 1 LINE 2 LAN 1 CONSOLE
RESET
Lock Nut
FF-120/220
Use only the DC power transformer supplied with the FaxFinder.
Use of any other transformer voids the warranty and can
damage the FaxFinder. The FF-420/820 models use a standard
power cord.
2. Verify powering.
After power is applied, the Power LED comes on immediately
but there is a 4-second delay before the Status LED comes on.
In normal operation, the Status LED will be flashing.
When you apply power, the FaxFinder performs a diagnostic
self-test. The Status indicator flashes when the test is complete
and the unit is ready. If this does not happen, check that the
power supply is solidly connected and that the AC outlet is live.
Multi-Tech Systems, Inc. 7