Miele FREESTANDING COFFEE MACHINE CM 5000 - Manual (Page 52)

If the brew unit cannot be remove or is
difficult to do, the brew unit may not be
in the correct position (see the
"Frequently asked questions").
Do not move the brew unit handle,
this could cause the brew unit to be
out of alignment and you would be
unable to fully push it back into the
machine.
Clean the brew unit by hand under
warm water without soap.
^ Wipe away any coffee from the two
filters. One filter is located in the
funnel a, the other is to the left of the
funnel b.
^ Thoroughly dry the funnel area a, to
prevent coffee from sticking to it.
^ Clean the inside of the coffee system.
Use a vacuum to remove dry coffee
grounds.
To replace the brew unit, repeat the
previous steps in the reverse order:
^ Push the brew unit back into the
coffee system, making sure it is
straight.
^ Press the button on the handle of the
brew unit a at the same time turn the
handle to the counterclockwise b.
^ Close the door. Turn the flaps 90°
counterclockwise. Lower the flaps.
Cleaning and care
52