Miele Refrigerator with Dynamic cooling K9752 - Manual (Page 28)

Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in strict accordance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
Ensure that current is not supplied to
the appliance until after
maintenance or repair work has
been carried out.
What to do if . . .
. . . the appliance does not get cool.
^ Check whether the appliance has
been switched on. The temperature
display must be lit up.
^ Check that the plug is correctly
inserted in the socket and switched
on.
^ Check that the fuse is not defective
and that the mains fuse has not
tripped. If it has, contact the Miele
Service Department.
. . . the temperature in the refrigerator
is too low.
^ Select a warmer temperature.
^ The Super cool function is still
switched on. Super cool only
switches itself off after 6 hours.
. . . the appliance is switching in too
frequently and for too long.
^ Check whether ventilation gaps in the
plinth and in the housing unit at the
top have been covered over or
become too dusty.
^ The door has been opened too
frequently, or a large amount of food
has just been put in at once.
^ Check that the door has been closed
properly.
. . . bars flash in the temperature
display.
Check the temperature display about 6
hours after switching on the appliance.
The display will not show a temperature
until the temperature in the appliance
has reached a certain level.
. . . the following messages show in
the temperature display "
F0" to "F5".
There is a fault. Call the Service
Department.
. . . you cannot switch the appliance
off.
The safety lock has been activated.
Problem solving guide
28