Multi-Tech Systems MMCModem GPRS (MTMMC-G) - Manual (Page 153)

Chapter 15 – GPRS Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 153
Syntax: Command Syntax:
Command Possible Response(s)
AT+CGQREQ=[<cid> [,<precedence >
[,<delay> [,<reliability.> [,<peak>
[,<mean>]]]]]] OK
ERROR
AT+CGQREQ? +CGQREQ: <cid>, <precedence >, <delay>, <reliability>,
<peak>, <mean>
[<CR><LF>+CGQREQ: <cid>, <precedence >, <delay>,
<reliability.>, <peak>, <mean>
[…]]
OK
AT+CGQREQ=? +CGQREQ: <PDP_type>, (list of supported
<precedence>s), (list of supported <delay>s), (list of
supported <reliability>s) , (list of supported <peak>s), (list
of supported <mean>s)
[<CR><LF>+CGQREQ: <PDP_type>, (list of supported
<precedence>s), (list of supported <delay>s), (list of
supported <reliability>s) , (list of supported <peak>s), (list
of supported <mean>s)
[…]]
OK
AT +CGQREQ=1,1,4,5,2,14 OK
AT+CGQREQ=?
+CGQREG: “IP”, (1-3), (1-4), (1-5), (1-9), (1-31)
+CGQREQ: “PPP”, (1-3), (1-4), (1-5), (1-9), (1-31)
OK
AT+CGQREQ? +CGQREQ: 1,1,4,5,2,14
OK