Mazda 2008 3 4-DOOR - Manual (Page 18)

Black plate (18,1)
qHeight Adjustment (Driver's Seat) í
By moving the seat lever up or down, the
seat bottom height can be adjusted.
Down
Up
qLumbar Support Adjustment
(Driver's Seat)
í
To adjust the lumbar support, pull the
lever forward.
qHead Restraint
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top is
even with the top of the passenger's ears,
never the passenger's neck to prevent
injury.
2-4
Essential Safety Equipment
í
Some models.
Seats
Mazda3_8X41-EA-07F_Edition1 Page18
Wednesday, April 25 2007 1:4 PM
Form No.8X41-EA-07F