Motorola M68EZ328ADS - Manual (Page 15)

Quick Installation Guide
2-14 M68EZ328ADS v2.0 USER’S MANUAL MOTOROLA
7. Edit the code inside the Codewarrior IDE program.
8. Press F5 to run the program.
Single Step Development System
A simple procedure for using Single Step Debugger:
1. Install the Single Step Debugger on your PC.
2. Run Single Step Debugger
3. Choose Debug in the File pull-down menu to open the Debug pop-up window.
4. Inside the Debug pop-up window, choose the object file to download or "debug without
file" as shown in Figure 2-5, select the serial port (COM1 or COM2 ...) according to the
serial port of the PC connecting to the ADS, disable "hardware flow control" and the
baud rate should be 115200bps as shown in Figure 2-6.
5. The file should be downloaded and then you can start your development. (For details,
please refer to the SingleStep User’s Manual).
Figure 2-5. Debug Pop-Up Window of SDS v7.4
Freescale Semiconductor, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc.
..
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
ARCHIVED BY FREESCALE SEMICONDUCT
OR,
INC.
2005