Mio C210 User Manual
Page 79
79
Lock button appears on the screen. Tapping it will re-enable Lock-to-Position. See
also Page 22.
Map Orientation:MioMap is able to rotate the map for your convenience. If you
choose Track-up mode, the map will be rotated to look in the direction of your
heading. Selecting North-up, the map remains oriented to have North toward the top.
Use the left and right hardware buttons to turn your map in the direction you wish.
This will immediately turn off the automatic rotation. A small compass in the top right
section of the map screens (Page 23) will always show the current direction of the
map. Map orientation should not be mixed up with Screen orientation.
NMEA (National Marine Electronics Association): This is the name of a
communication protocol format. This association issues standards for interfacing
marine electronic devices. One of their standards is NMEA-0183 that defines
electrical signal requirements and a data transmission protocol for time and position
data. This is today’s standard for not only marine but also all other GPS devices.
MioMap, as well as most GPS devices, will default to using this protocol out of the
box.
North-up: A kind of map orientation having the map rotated to have North toward
the top of the screen. See also Track-up and Map Orientation.
POI: Points Of Interest, exact map locations of important points saved in a database
together with their name, category and subcategories (e.g. Service/Fuel/Autogas),
address, phone and fax number, and other important information. Use the versatile
search system in MioMap to find the appropriate POI near you, your destination or
any other given location on the map (Page 59). You can also have your favourite
places saved as ‘My POI’ in MioMap.
Track log: In MioMap you have the possibility to record your journeys using the
position data your GPS provides in every second or every few seconds (depending
on your GPS settings). When you start the recording, position data are saved in the
database until you stop recording it. This set of sequential GPS positions is called
track log. Each set of consecutive positions has a name (originally it is the time of
recording but you can change it to any name you like) and a colour in which it can be
displayed on the map. Later you can replay the journey on the screen of MioMap as
if it were happening again. This is good for demonstration purposes or for analysing
your manoeuvres during the trip. See also Page 39.
Track-up: A kind of map orientation when the map is rotated to look always in the
direction of your heading. See also North-up and Map Orientation.
Via point: Routes in MioMap can have several (as many as you want) different
destinations to reach in a specific order. All these points except the final destination
are called via points, as the route goes ‘via’ (through) them. The destinations can be
seen in the Route Information screen on the Route line (Page 32), and each via point
is announced by the voice instructions as you approach and when you reach it.
Should your via point serve as a stopover, navigation continues automatically as you
depart. Navigation will resume even if you turn off and on your PDA or restart
MioMap.