Marantz SR-18EX - Manual (Page 27)

22
ENGLISH
FUNCTION AND OPERATION
z
MODE (operating mode)
This button is used to change from normal operation to the learning
mode, and is used when “learning” commands from other brands of
A/V components. Each time this button is pressed (using a small
pointed instrument, such as the tip of a paper clip) the mode changes
as follows: LEARN
→ USE → NAME. As the mode changes, the LCD
display will show which mode is currently selected.
x
MACRO (for multiple step macro functions)
This button is used to memorize a series of functions. When this
button is pressed, the RC-18SR changes to macro programming
mode, and is ready to learn a sequence of remote control commands.
REMOTE CONTROL UNIT RC-18SR
n The remote control unit provided with the SR-19EX is a
“learning”-type, programmable unit capable of controlling
almost any component in your system, as well as the
Marantz D-BUS components (RC-5). The components to be
controlled can be selected with 11 function buttons.
OPERATION
The provided remote control unit (RC-18SR) is a system remote
controller. The
POWER button v, 10-key numeric buttons ⁄2 and
control buttons ⁄5 are used in common across different input source
components.
The input source system controlled with the RC-18SR changes when
one of the input selector buttons . is pressed.
nExample: To select the LD player as the input source and
play an LD on it
Press the
LD button twice within 2 seconds.
The input function of the SR-19EX is switched to LD
and the
RC-18SR is set for control of the LD player.
Press the PLAY button ⁄5 to play an LD.
ON OFF
SOURCE
CLONE MACRO MODE
MACRO
REMOTE L E A R N I N G CONTROL
ON/OFF
DSS /
VOL
AMP GUIDE MUTE
1
2
MACRO
D1
D2
D3
D4
D5
D6
D7
D8
3
4
POWER
VCR2
TV LD DVD VCR
TUNER CD TAPE AUX CD-R
/ MD
CH
OK
1 3 2
4 6 5
7 9 8
M C 0 LOW
USE
LEARN
NAME
1 2 3 4
R C - 1 8 S R
LOW
USE
LEARN
NAME
1 2 3 4