Metabo Invert 130/60 - Manual (Page 2)

ENG
Table of Contents
1 Technical Specifications
2 Scope of Application
2.1 Information
3
Commissioning
4 Description
5 Operation
6 TIG-Welding (optional)
6.1 Tips for TIG-Welding
7
Overloads
8 Trouble Shooting
9 Safety Information
9.1 Protection against Electrical Accidents
10 Wiring Diagram
Invert 130/40 Invert 130/60
Mains voltage: 1 ~ 230/240 V 1 ~ 230/240 V
Mains frequency: 50 - 60 Hz 50 - 60 Hz
Setting range: 100 V 100 V
Stromeinstellbereich: 5 - 130 A 5 - 130 A
Power input: manual arc 4.5 kVA 4.85 kVA
TIG 3.1 kVA 3.1 kVA
Operating voltage: manual arc 20,2 - 25,2 V 20.2 - 25.2 V
TIG 10,2 - 15,2 V 10.2 - 15.2 V
Max. current draw: 27 A 27 A
Mains fuse: 16 A time-lag 16 A time-lag
Duty cycle at max. manual arc 130 A / 50 % / 35 % 130 A / 80 % / 55 %
ouput (25
°
C/ 40
°
C): TIG 130 A / 40 % / 30 % 130 A / 60 % / 40 %
Operating modes: manual arc/TIG manual arc/TIG
Setting: stepless stepless
Suitable electrodes manual arc from 1.5 mm Ø from 1.5 mm Ø
TIG for steel 0.3 mm and up for steel 0.3 mm and up
Protection class: IP 23 S IP 23 S
Cooling: F F
Insulation class: F F
Temperature range: operation -10
°
C - +40
°
C -10
°
C - +40
°
C
Dimensions ( l x w x h): 255 x 110 x 210 mm 235 x 110 x 220 mm
Weight: 4.9 kg 4.9 kg
Operating conditions: relative humidity 10-80 % relative humidity 10-80 %
1 Technical Specifications
Product Liability/Warranty
This product shall only be used as specified. Any other use requires the written consent of
Metabo GmbH, Business Unit Elektra Beckum, P.O.Box 1352, D-49703 Meppen, Germany.
Please contact your dealer for any warranty claims.
Warranty work will essentially be carried out by service centres authorised by us. Repairs beyond the warranty
period may be carried out only by our authorised service centres.
Please preserve all repair invoices!
We reserve the right to make technical changes!
2 Scope of Application
The inverter welding machines are designed as a compact, easy to operate and field-safe unit. With it all metals
(except aluminium) can be welded. Special consideration has been given to stick electrode welding capabilities,
i.e. vertical-down welding. Due to its wide range of welding current setting the Invert 130 is very versatile, e.g. for
sheet metal and steel welding. In addition there is the capability of TIG welding with scratch start. With this welding
process steel, stainless steel and NF-metals (except aluminium) can be welded, e.g. thin plate welding or car body
work.