Multi-Tech Systems PN S000408C - Manual (Page 21)

Chapter 3 – Using the Front Panel
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 21
Setting Country/Region Codes Trunk
Region Profile
Region Profile
question mark represents the question “Is this the region
not the one you want, arrow across until you see the code
Region Profile
Region Profile
Status
Basic Options
Advanced
Options
Remote Config
Diagnostics
Phone Number
Memory
Region Select
Caller ID
Region Setting
Options B5?
Region Profile
99?
Region Profile
01? 02?
Region Profile
03?
Region Profile
04?
1. Start at the Status LCD and use the down arrow to
move down the menu tree to the Region Select LCD.
4.When you reach the region code you want, press
Enter. After pressing Enter, you will see the message
Option Set .
2. Use the right arrow to move from the Region Select
LCD, across the Region Setting Options LCD, to the
Current Setting LCD.
3. If the current setting shown is not the one for your
region, arrow across to the Region Profile LCD. The
you want?” If B5 is the one you want, press Enter; if it’s
you desire. See the list of Region Codes on the back of
this card.
Current Setting
5. After setting the region profile, you can re-power the
modem or use the arrows to move back and up the menu
tree to return to the Status LCD.
00?
Region Profile
09?
Region Profile
6C? 9F?