Motorola SURFBOARD SBG1000 - Manual (Page 5)

Quick Installation Guide 5
A. Connect the SBG1000 to Your Cable TV System
You may need to call your cable provider to activate your high-speed Internet
service. Your cable provider may require the MAC address labeled CM HFC
MAC ID on the bottom of the SBG1000. Please write your CM HFC MAC ID
here:
00 : ______ : ______ : ______ : ______ : ______
Connecting Directly to the Cable Outlet
1
Connect one end of the coaxial cable to the cable TV wall outlet and its
other end to the cable port on the SBG1000.
2 Plug the AC power cord into the power connector on the SBG1000.
3 Plug the AC power cord into an AC wall outlet or surge protector.
RESET
5 4 3 2 1