Problem solving guide – Miele T 4422 C User Manual

Page 31

Advertising
background image

Problem

Possible cause

Remedy

The Clean out
airways
lamp comes
on.

The fluff filters may be
blocked.

Remove any fluff (see
"Cleaning and care").

The condenser unit may be
blocked with fluff and
detergent residues.

Please note that the
condenser unit must be
cleaned regularly (see
"Cleaning and care").

The check lamp will go out
when the door is opened.

The programme
stops and the Clean
out airways
lamp
flashes.

Possible causes and remedies are described above in
(The

Clean out airways

lamp comes on).

There is no obvious cause.

Switch off the dryer.

Then switch the dryer
back on and start the
programme again.

If the programme stops
again and the

Clean out

airways

lamp flashes, there

is a fault. Contact the Miele
Service Department.

The Empty out
container
indicator
lamp comes on.

The condensed water
container is full or there is
kink in the drain hose.

Empty out the
condensed water
container.

Check the drain hose.

Before starting a new
programme, first switch
the dryer off and then on
again.

Problem solving guide

31

Advertising