Motorola SURFboard 570280-001-a - Manual (Page 40)

B
Advanced Pages • Advanced Options Page
Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide 32
570280-001-a
Field Descriptions for the Advanced Options Page
Field Description
WAN Blocking Prevents the SBG941 Configuration Manager or the PCs
behind it from being visible to other computers on the SBG941
WAN.
Select
Enable to turn on this option.
IPsec PassThrough Enables the IPsec Pass-Through protocol to be used through
the SBG941 Configuration Manager so that a VPN device (or
software) may communicate properly with the WAN.
Select
Enable to turn on this option.
PPTP PassThrough Enables the Point-to-Point Tunneling Protocol (PPTP)
Pass-Through protocol to be used through the SBG941
Configuration Manager so that a VPN device (or software) may
communicate properly with the WAN.
Select
Enable to turn on this option.
Remote Config Management Allows remote access to the SBG941 Configuration Manager.
For example, in the browser URL window, type
http://WanIPAddress:8080/ to access the SBG941
Configuration Manager remotely.
Select
Enable to turn on this option.
Multicast Enable Allows multicast-specific traffic (denoted by a specific address)
to be passed to and from the PCs on the private network
behind the configuration manager.
Select
Enable to turn on this option.
UPnP Enable Turns on the Universal Plug and Play protocol (UPnP) agent in
the configuration manager. If you are running a CPE (client)
application that requires UPnP, select this box.
Select
Enable to turn on this option.
Rg PassThrough Disables NAT operation allowing all client computers to act as
passthrough clients.
Select
Enable to turn on this option.
PassThrough Mac Addresses Specifies up to 32 computers as passthrough clients not
subject to NAT, using their MAC addresses.
To enable this feature, your cable operator may need to
provide additional public IP addresses.
When done, click Apply to save your changes.