Memorex MX5510 - Manual (Page 10)

10
FUNCTIONAL OVERVIEW
12. TUNER / BAND
•Not in TUNER mode, press to set TUNER mode.
•In TUNER mode, press to change the receiving BAND
between FM and AM
13. CD
•Not in CD mode, press to set CD mode.
•In CD mode, it has the same function as the DISC
SKIP key. Press to set or skip to next valid disc in
ascending order.
14. TAPE
Press to select the function of TAPE.
15. PHONO / AUX
Press to select the PHONO function or the AUX input
source. Both PHONO and AUX are mixing-channels.
You can mix sounds if you play the PHONO and input
another signal from the AUX at the same time.
16. OPEN / CLOSE
Press to open or close the CD door
17. DISC SKIP
•In CD memory set mode, press to set to next valid
disc number in ascending order.
•In CD normal play or stop mode,press to skip to next
valid disc in ascending order.
•Not in CD mode, press to skip to next valid disc in
ascending order when the door is open.
18. VOLUME
Press the VOLUME button to adjust the volume level
up or down.
19. MODE / REMAIN
•In TUNER mode, press to change the following dis-
play : Band and Frequency, Time display.
•In CD normal play mode, press to change the follow-
ing display : Each playing time, Each remaining time,
Total remaining time, Total playing time, Time display.
•In CD random play mode, press to change the follow-
ing display : Each playing time, Each remaining time,
Time display.
•In CD memory play mode, press to change the fol-
lowing display : Each playing time, Each remaining
time, Program number, Time display.
•In CD stop mode, press to change the following dis-
play : All time display, Time display.
•In TAPE or AUX mode, press to change the following
display : AUX or TAPE, Time display.
NOTE: The above Time display includes: Clock display,
Time ON, Time OFF.
FRONT PANEL
1. REPEAT / MEMO • UP
•In CD mode, press to change the following repeat play
mode : All disc, Rpeat all disc, Repeat one disc,
Repeat one track.
•In TUNER mode, press to display the preset memory
in ascending order.
2. STOP / MEMO • DOWN
•In CD mode, press to stop CD playing and exit CD
memory registration mode. When CD is stoped, press
this key to clear CD memory.
•In TUNER mode, press to display the preset memory
in descending order.
3. TIMER
Press to set timer on or off. When timer is on, will
illuminate.
4. ST. / NOR & MONO. / H.S.D.
•In TAPE RECORD mode, press to select normal mode
or to increase the TAPE recording speed to twice the
normal recording speed.
•In FM mode, press to select either STEREO sound or
MONO sound.
5. SLEEP
Press to select the SLEEP timer on or off. Keep press-
ing this key to set the sleep time from 00 to 90 min-
utes.
6. POWER
Press the POWER button to switch the main power of
the unit to ON or STANDBY.
7. FLAT
Press to select FLAT sound mode.
8. ROCK
Press to select ROCK sound mode.
9. CLASSIC
Press to select CLASSIC sound mode.
10. POP
Press to select POP sound mode.
11. SENSOR
Infrared rays sensor, to receive the information
transmitted from the remote control.
FRONT PANEL