To remove the rear cushion, Seating and safety restraints – Mazda 2009 Tribute HEV User Manual

Page 115

Advertising
background image

WARNING: Make sure seat belt buckle heads are through
elastic holders on seat backs. Seat belt buckles may break if they

are trapped underneath the seatback as the seatback is rotated down.

WARNING: Before returning the seatback to its original
position, make sure that cargo or any objects are not trapped

behind the seatback. After returning the seatback to its original
position, reinstall the head restraints, and pull on the seatback to
ensure that it has fully latched. An unlatched seat may become
dangerous in the event of a sudden stop or collision.

WARNING: Remove the
head restraint stored under

the front set and return it to the
original position on the seatback.
Failure to do so could result in
personal injury.

3. Unsnap the seat belt webbing from the quarter trim panel.

To remove the rear cushion

1. Lift the yellow tab to release the

hinges.

2. Pull the cushion to the outboard

side of the vehicle.

2009 Tribute Hybrid (thv)
Owners Guide, 1st Printing
USA
(fus)

Seating and Safety Restraints

115

Advertising