2adjusting the colour of image (white balance) – MITSUBISHI ELECTRIC DIS710E User Manual
Page 15
15
7
7
7
7
7
Press SHOT button to take a picture.
Check the brightness of image.
If the brightness is not improved, repeat the steps
2
to
6
to
get the best setting.
camera
a piece of
white paper
actual distance of a person
who is taking a picture
2
2
2
2
2
ADJUSTING THE COLOUR OF IMAGE (WHITE BALANCE)
Default setting is flash light W.B. If you are not satisfied with this
setting, please proceed as follows.
1
1
1
1
1
Place a piece of white paper in front of the camera and
display it to cover the LCD.
Place white paper at the actual position where the subject would
normally sit.
NOTE
Do not display the picture with non-white objects when adjusting
white balance.
Adjust white balance under sufficient light.
2
2
2
2
2
Press SHOT button with flashing a strobe light to take a
picture.
3
3
3
3
3
Press WB button.
White balance adjustment mode is selected.
4
4
4
4
4
Press UP or DOWN button to select LOCK.
5
5
5
5
5
Press SET button for about 5 seconds until white balance
is locked.
LOCK
WB
PRG.1
WB (UP)
PRESET
(DOWN)
WB
LOCK
5 sec.