Miele KM 5880 - Manual (Page 31)

The programming of your cooktop can
be modified (see chart).
After starting the programming function
P (Program) and an S (Status) will
appear in the timer display. With
cooktops that have 3 burners, an
additional display appears at the back
left.
The program is displayed in the front
left and back left settings bars.
Example:
Program 3 = front left
3, back left 0
Program 14 = front left 4, back left 1
The status is displayed in the front right
settings bar.
Once you have left the programming
mode, the cooktop will be reset
automatically. This is completed when
an indicator above the On/Off
s touch
control lights up briefly.
Do not turn the cooktop on again until
the reset process is completed.
To start programming
^ With the cooktop turned off, touch
and hold the
s control and $ at the
same time, until the Child safety lock
indicator flashes.
To set the program
^ To set the first number, touch the
respective number on the back left
settings bar.
^ To set the second number, touch the
respective number on the front left
settings bar.
To set the status
^ Touch the respective number on the
front right settings bar.
To save the settings
^ Touch the s control until the displays
go out.
If you do not wish to save the
settings
^ Touch the $ control until the displays
go out.
Programming
31