Martin Audio WMX - Manual

WMX
Hybrid™ horn and reflex loaded subwoofer
features
◗
Very high output compact Hybrid™ folded horn/reflex loaded
subwoofer.
◗
Single 18" (460mm) ultra-long excursion high power drive unit
◗
Frequency response 35Hz-150Hz ± 3dB (-10dB @ 28Hz)
◗
104dB 1W/1m
◗
Fast integral rigging system
◗
Compatable with W8LM and W8LMD line array elements
◗
Can be ground stacked or flown
◗
Socket for pole mounted W8LMD
applications
◗
Dedicated flown or groundstacked sub for use with W8LM and W8LMD
◗
Ground stacked sub with any Martin Audio Wavefront products
◗
Fixed installations
◗
Live sound reinforcement
◗
Corporate events
◗
Theatre sound reinforcement
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
The Martin Audio WMX is a compact, high performance flown or
ground stacked subwoofer featuring our trademark Hybrid™
loading. Primarily intended for use with the W8LM/W8LMD, it
shares the same cabinet width and is directly compatible with the
W8LM and its flying hardware.
A single long-excursion 18" (460mm)/ 4" (100mm) coil driver is
front loaded by a hyperbolic horn with an ultra-low flare rate. The
rear of the driver is reflex loaded to extend the LF output to below
the natural cut-off point of the horn. This Hybrid™ technique
marries the very high efficiency of horn loading with the extended
low frequency response of a reflex enclosure.
www.martin-audio.com
overall dimensions
technical specifications
TYPE Hybrid™ horn and reflex loaded subwoofer
FREQUENCY RESPONSE (1) 35Hz-150Hz ± 3dB
-10dB @ 28Hz
DRIVERS 18" (460mm)/ 4" (100mm) voice coil, ultra-long
excursion, water resistant cone
RATED POWER (2) 1000W AES, 4000W peak
SENSITIVITY (6,3) 98dB (open space), 104dB (half space)
MAXIMUM SPL 127dB continuous, 133dB peak (open space)
(calculated @ 1m) 133dB continuous, 139dB peak (half space)
NOMINAL IMPEDANCE 8 ohms
CROSSOVER 70Hz-150Hz active low pass
(via DX1 controller)
ENCLOSURE Rectangular, multi-laminate birch ply
FINISH Textured paint
PROTECTIVE GRILLE Perforated steel
CONNECTORS 2 x Neutrik NL8
FITTINGS Proprietary rigging system
Interlocking skids on top & bottom
2 generously sized bar handles on each side
Mounting clips for optional lid
Top mounted top hat fitting
DIMENSIONS (inc. wheels) (W) 620mm x (H) 620mm x (D) 905mm
(1032mm)
(W) 24.4ins x (H) 24.4ins x (D) 35.6ins (40.6ins)
WEIGHT 87kg (191lbs)
touring and theatre