Oogie, Page 3 – Mesa/Boogie M 2000 User Manual
Page 8
OOGIE
B
M
ESA
MIDDLE
GAIN
TREBLE
BASS
MASTER
VACUUM TUBE CHANNEL
OUT
EQ IN
MIX MODE
BRIGHT
NORMAL
HI GAIN
NORMAL
MIX
ASSIGN
80
180 300 600 1.2K
50Hz
4K
6K
8K
MIDDLE
GAIN
TREBLE
BASS
MASTER
VACUUM TUBE CHANNEL
80
180 300 600 1.2K
50Hz
4K
6K
8K
OOGIE
B
M
ESA
OUT
EQ IN
MIX MODE
BRIGHT
NORMAL
HI GAIN
NORMAL
MIX
ASSIGN
LISTENING LEVEL
Select the VACUUM TUBE CHANNEL using the footswitch labeled TUBE on
the Foot Controller and set the controls as per this example.
The
M-2000 automatically returns to the mode that was last used upon
power-up, (when the Channel Select rotary switch is set to Footswitch.) When the
Foot Controller is not being used, the
M-2000 will power-up with the mode
chosen on the Channel Select rotary switch.
NOTE
With your instrument connected to the proper Input jack (Passive or Active,) SLOWLY bring up the
volume with the Output Level control while playing a note.
Use care as this control is capable of unleashing substantial
power which can result in either speaker or hearing damage.
VACUUM TUBE CHANNEL
MINI TOGGLES
Locate the 3 mini toggle switches on the left side of this channel and set to these positions.
COMPRESSOR THRESHOLD & FREQUENCY
Set the Vacuum Tube Channel's Compressor Threshold and Frequency
Controls per this example, while leaving the Ratio toggle switch in the
OFF (down position.)
3:1
5:1
OFF
THRESHOLD
COMPRESSION
FREQUENCY
3:1
5:1
OFF
COMPRESSION
FREQUENCY
THRESHOLD
5:1
3:1
OFF
50%
MIX
OUTPUT LEVEL
TUBE
HI GAIN
FET
CLIP
TUBE
FET
MIX
OUTPUT LEVEL
50%
TUBE
HI GAIN
FET
CLIP
TUBE
FET
ROTARY CONTROLS & GRAPHIC EQ
NOTE
PAGE 3