Motorola W377G - Manual (Page 27)

25 basics
To turn on the handsfree speaker, press SPKR ON.
While the handsfree speaker is on, your display shows
Spkrphone On.
To turn off the handsfree speaker, do either of the
following:
• End the call.
• Press SPKR OFF.
codes & passwords
Your phone’s four-digit unlock code is originally set to
1234 or to the last four digits of your phone number.
The six-digit security code is originally set to 000000.
Your service provider may reset these codes before
you get your phone.
If your service provider didn’t change these codes,
you should change them to prevent others from
accessing your personal information. The unlock code
must contain four digits. The security code must
contain six digits.
To change a code or password:
Find it: s > w Settings > Security > New Passwords
You can also change your SIM PIN codes or call
barring password.
Select the type of code you want to change, enter the
old code when prompted, then enter the new code.
If you forget your unlock code: At the Enter Unlock Code:
prompt, try entering 1234 or the last four digits of your
phone number. If that doesn’t work, contact your
service provider.
If you forget other codes: If you forget your security
code, SIM PIN code, PIN2 code, or call barring
password, contact your service provider.