Konica Minolta bizhub C300 - Manual (Page 173)

9 Registering/Settings
9-14 Network Fax
Re
gist
er
ing/
Set
ti
ngs
Chapter 9
3
Select the Program you want to register and then press [Edit].
4
Set the functions.
– Name:
Enter the registration name.
– Receiving Model Type:
– Set the model type (Full Color/Black) of the other party. (In the case
of the Internet Fax, this cannot be used.)
– Destination:
Select an address from [Select from Address Book] or enter it
directly through [Direct Input].
– When Address Book is specified for an address, the details of the
setting for Program take precedence over those for Address Book.
– Scan Setting:
When setting the Scan Setting, press [Yes] and then set each
function.
– Comm. Setting:
When setting the Comm. Setting, press [Yes] and then set each
function. In the case of the network fax, this is not used.
5
Press [OK].
Registration is performed and the registered destination is displayed
on a list.
6
Press [Close].