Mercedes-Benz 2004 C 320 Sport User Manual

Page 52

Advertising
background image

52

Getting started

Parking and locking

Turning off engine

̈

Place the gear selector lever in
position P (manual transmission: first
or reverse gear).

̈

Turn the SmartKey in the starter switch
to position 0 and remove it.
The immobilizer is activated.

̈

Press the seat belt release button
(

page 41).

Allow the retractor to completely
rewind the seat belt by guiding the
latch plate.

̈

After exiting the vehicle, press the lock
button

‹ on the SmartKey

(

page 30).

All turn signal lamps flash three times.
The locking knobs in the doors move
down.

For more information, see “Locking and
unlocking” (

page 82).

i

Always set the parking brake in addi-
tion to shifting to position P (manual
transmission: first or reverse gear).

On steep slopes, turn the front wheels
towards the road curb.

i

Vehicles with automatic transmission:
The SmartKey can only be removed
from the starter switch with the gear
selector lever in position P.

!

With the SmartKey removed and the
driver’s door open, a warning sounds if
the vehicle’s exterior lamps are not
switched off.

Warning!

G

To prevent possible personal injury, always
keep hands and fingers away from the door
openings when closing the doors. Be espe-
cially careful when small children are
around.

Before closing doors, make sure there is no
possibility of someone getting caught in a
door during closing.

Warning!

G

When leaving the vehicle, always remove the
SmartKey from the starter switch, and lock
your vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. Unsupervised use of vehi-
cle equipment may cause an accident
and/or serious personal injury.

Advertising