Multi-Tech Systems GFU19 - Manual (Page 5)

GPS1200 GFU19 MultiTech CDMA Modem Quick Guide July, 2005
Page 5/18
GFU19 Multi-Tech CDMA Modem
OTA Activation Using Your Internet Data Plan
Step Action Display
4
From the CONFIGURE Real-Time Mode
screen:
• Ensure that the R-Time Mode and R-
Time Data fields are set
appropriately.
• Select the port to which your modem
is attached in the Port field.
• Press the F5 (DEVCE) button.
This takes you to the CONFIGURE Devices
screen.
5 From the CONFIGURE Devices screen:
• Press the F6 (PAGE) button once to
access the “Modems/GSM” page.
• Highlight the MultiTech CDMA
modem and press the SHIFT – F5
(DEFLT) button to ensure that the
modem’s default settings are active.
• Press the F1 (CONT) button to
accept this device configuration and
return to the CONFIGURE Interfaces
screen.
• At this point a “Warning: This port
is already configured to be used
by the Internet interface. Do you
wish to close the Internet
interface?” message might appear.
If it does, press the F6 (YES) button.
This returns you to the CONFIGURE
Interfaces screen.
Continued on next page