Mazda 2009 5 - Manual (Page 19)

18
• To set a channel, first select
AM, FM1, or FM2. Tune to the
desired station.
• Tune to the desired station.
• Press any channel preset
on-screen button for about 2
seconds until a beep sound
is heard. The selected preset
channel number and station
frequency will be displayed.
• The station is now held in
the memory.
• Repeat this operation for the
other stations and bands you
want to store. To tune to one in
the memory, select AM, FM1, or
FM2 and then press the channel
preset button. The station
frequency and the channel
number will be displayed.
Note: If the power supply is
interrupted (fuse blows or the battery is
disconnected), the preset channels will
be erased.
Auto memory Tuning
This is especially useful when
driving in an area where the local
stations are not known. additional
AM stations can be stored
without disturbing the previously
set channels.
The navigation clock is
automatically updated through
the gPS satellite system. To
change the time,
1. Press the menu button.
2. Select the SeT CLOCK
on-screen button. It will give you
a choice of selecting a 24-hour
display or a 12-hour display.
3. Use the plus (+) minutes and
minus (-) minutes on-screen
buttons to set the minutes
ahead or back 30 minutes.
4. exit by pressing the OK
on-screen button.
ChANgiNg YoUR
NAvigATioN CLoCK
1. Put the ignition in the aCC
or ON position.
2. Press
LOAD /
.
3. Press the LOAD
on-screen button lightly.
4. Wait for the screen
to lower.
5. insert the CD after “iN”
is displayed on the
information Display.
The CD will begin playing
after the screen closes.
To PLAY A CD
162129_09a_Mazda5_SSG_073008b.indd 19 7/30/08 8:38:04 PM