Miele DA 289-3 - Manual (Page 27)

Cut out area in wall or ceiling for
entrance of 6" (150 mm)
ductwork or 5" (125 mm)
ductwork with a reducing collar.
Standard unit height H =
37 13 /
16
" - 51 15 /
16
"
(960 – 1320 mm)
Distance S above the cooktop
Do not install this exhaust hood over
cooktops burning solid fuel.
When installing the hood, make sure
that the
minimum safety distance
( S ) between the top of a Miele
cooktop and the bottom of the hood
is at least 14
3
/
8
" (365 mm).
For non-Miele cooking appliances
maintain the safety distances recom-
mended by the cooktop manufac-
turer in their installation and operat-
ing instructions.
If there is more than one appliance
beneath the hood and they have dif-
ferent minimum safety distances al-
ways select the greater distance.
See "IMPORTANT SAFETY IN-
STRUCTIONS" for further informa-
tion.
Read the entire installation procedure
and determine height (
S ) before begin-
ning the installation. Installations differ
depending on the model and venting
method. If the hood is fitted flush to the
ceiling, the sum of
S + H + Workspace
should not exceed the room height.
Appliance dimensions
27