Milan Technology MIL-W0311 - Manual (Page 11)

8
Chapter 2
Installation
This Chapter covers the physical installation of the Wireless Gateway.
Requirements
• Ethernet LAN (10/100BaseT) and the TCP/IP protocol.
• For Internet Access, an Internet Access account with an ISP, and either of:
• A DSL or Cable modem (for WAN port usage)
• An analog modem or ISDN TA (for serial port usage)
• To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11b specifications.
• For shared access to the attached printer, the following clients are supported:
• Windows 95/98/ME
• Windows NT 4.0 or 2000
• Apple Macintosh
• Unix (LPD printing)
Procedure
Figure 3: Installation Diagram
1. Choose an Installation Site
Select a suitable physical location. Ensure the Wireless Gateway and the DSL/Cable mo-
dem are powered OFF.
2