Milan Technology CCSF30XX-100 - Manual

*Typical maximum cable distance. Actual
distance is dependent upon the physical
characteristics of the network.
Part Number Port One - Copper Port Two - Duplex Fiber-Optic
CCSCF3011-100 75 ohm coax (BNC) ST, 1300 nm multimode
2 km (1.2 miles)*
CCSCF3013-100 75 ohm coax (BNC) SC, 1300 nm multimode
2 km (1.2 miles)*
CCSCF3014-100 75 ohm coax (BNC) SC, 1310 nm single mode
20 km (12.4 miles)*
CCSCF3015-100 75 ohm coax (BNC) SC, 1310 nm single mode
40 km (24.8 miles)*
CCSCF3016-100 75 ohm coax (BNC) SC, 1310 nm single mode
60 km (37.3 miles)*
CCSCF3017-100 75 ohm coax (BNC) SC, 1550 nm single mode
80 km (49.7 miles)*
CCSCF3018-100 75 ohm coax (BNC) MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
CCSCF3019-100 75 ohm coax (BNC) LC, 1310 nm single mode
20 km (12.4 miles)*
User’s Guide
CCSCF30xx-10x
Slide-in-Module Media Converter
•
DS3 or T3 / E3
• Coax (BNC) to Fiber
Transition Networks CCSCF30xx-10x series media
converters encode and decode DS3 or E3 coax
copper signals over fiber optic cable to extend the
distance and transmission reliability of high-speed
DS3 or E3 data traffic. The CCSCF30xx-10x,
which is designed to be installed in a Transition
Networks PointSystem™ chassis, also connects
remote locations via T3/E3 cable.
NOTE: The SCSCF30xx-10x model is the stand-alone version of the media
converter. For more information, see the SCSCF30xx-10x user’s guide on-line at
www.transition.com.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .6
Cable Specifications . . . . . . . . . . .7
Technical Specifications . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . .9
Compliance Information . . . . . . .12
CCSCF3029-100 ** 75 ohm coax (BNC) SC, 1310 nm (TX)/1550 nm (RX)
single mode, 20 km (12.4 miles)*