Quick setup screen, Quick setup - overview – Milan Technology MIL-W0311 User Manual
Page 16
Configuration
13
Quick Setup Screen
The Quick Setup screen, like the example below, will be displayed when you first connect.
Figure 5: Quick Setup Screen
Quick Setup - Overview
This screen contains all the basic data to make the Wireless Gateway operational.
For many users, the default values will be satisfactory, and no changes will be required.
•
Router Most users do not need to change these values.
•
LAN Settings There is no need to change the LAN settings unless:
•
You wish to use a different IP Address range
•
You already have a DHCP Server or a Router on your LAN.
See Chapter 5 -DHCP for more details about DHCP, or Chapter 8 - Routing for de-
tails about using Routers on your LAN.
•
WAN Port Settings By default, the Wireless Gateway is configured for WAN access
using a "Direct Connection" (cable modem or permanent DSL link) and a dynamic IP Ad-
dress (the IP Address is supplied by your ISP when you connect). For this common
situation, no changes are required.