Mitsumi electronic Pedion Laptop User Manual
Page 78
OWNER’S HANDBOOK
T r o u b l e s h o o t i n g 7 / 7
Printer
Problem
Possible solutions
Printer does not print
Check the printer cables and connections.
Make sure the printer was turned on before turning on the Pedion.
Check that the Pedion is properly connected to the Multimedia Pack.
Use BIOS Setup to make sure the parallel port is configured correctly
for the type of printer; e.g. some printers require ECP mode.
Check that the printer driver software is properly installed. Refer to the
documentation that came with your printer.
Touchpad
Problem
Possible solutions
Touchpad does not work at
all
If an external mouse is connected, the touchpad is automatically
disabled.
Make sure there is nothing metallic on or near the touchpad.
Touchpad responds slowly
Make sure both the touchpad and your finger are clean and dry.