Controls in detail, Control system – Mercedes-Benz 2011 SL-Class User Manual

Page 119

Advertising
background image

The engine oil temperature flashes if the
engine oil temperature has not yet reached
80†. During this time, avoid driving at full
engine speed.
If the engine reaches the overspeed range in
the manual shift program, the menu will be
shown in red. In addition, you will see

UP next

to gear indicator ; as a reminder to upshift.
Use buttons & or * to select the
following functions in the

AMG menu:

R

SETUP (

Y

page 117)

R

RACETIMER (

Y

page 117)

R

Overall analysis (

Y

page 118)

R

Lap analysis (

Y

page 118)

SETUP

X

Press button V or U repeatedly until
the

AMG menu appears in the

multifunction display.

X

Press button & repeatedly until the
SETUP appears in the multifunction
display.

or

X

Tap the AMG button on the center console
(SL 63 AMG only) (

Y

page 144).

i

You can store and call up automatic

transmission program mode and
suspension style settings with the AMG
button on the center console (SL 63 AMG
only). For more information, see
(

Y

page 144).

:

Automatic transmission program mode
indicator

;

Suspension style indicator

RACETIMER

G

Warning!

The RACETIMER feature is only for use on
roads and in conditions where high speed
driving is permitted. Racing on public roads is
prohibited under all circumstances. The driver
is and must always remain responsible for
following posted speed limits.

The RACETIMER allows you to time and save
driving stretches.

X

Press button V or U repeatedly until
the

AMG menu appears in the

multifunction display.

X

Press button & repeatedly until the
RACETIMER appears in the multifunction
display.

:

Lap number

;

RACETIMER

=

Gear indicator

You can start the RACETIMER when the
engine is running or the starter switch is in
position

2 (

Y

page 78).

While the RACETIMER is being displayed, you
cannot adjust the audio volume using buttons
W or X.

X

Starting: Press button W.

X

Displaying intermediate time: Press

button X while the timer is running.
The intermediate time is shown for
5 seconds.

X

Stopping: Press button W.

When you stop the vehicle and turn the
SmartKey to position

1 (

Y

page 78) or, in

vehicles with KEYLESS-GO, turn off the
engine and do not open the driver’s door, the

Control system

117

Controls in detail

230_AKB; 6; 22, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-28T18:49:58+02:00 - Seite 117

Z

Advertising