Mintek High Definition Personal Video Recorder - Manual (Page 16)

PROGRAMMING CHANNEL CONTROL
By following the steps below, the user can program the channel controls (Channel Up, Channel Down and Last)
from one device to operate in another device mode. The default channel control settings on the remote control are
as follows:
CBL : PVR TV : PVR VCR : PVR DVD : DVD AUX : AUX
If you wish to store the TV channel control in TV mode, use the following steps:
1. Press the TV button and the SELECT button simultaneously for 3 seconds. The TV device LED will turn on.
Tip: The device LED will light on for 20 seconds. The next step must be entered while the LED is on.
2. Press the VOL– button.
3. Press the TV button. The device LED will blink twice to confirm the programming.
PROGRAMMING VOLUME CONTROL
By following the steps below, the user can program the volume controls (Volume Up, Volume Down and Mute)
from one device to operate in another device mode. The default volume control settings on the remote control are
as follows:
CBL : PVR TV : PVR VCR : PVR DVD : PVR AUX : AUX
If you wish to store the CBL volume control in CBL mode, use the following steps:
1. Press the CBL button and the SELECT button simultaneously for 3 seconds. The CBL device LED will turn on.
Tip: The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
2. Press the VOL+ button.
3. Press the CBL button. The device LED will blink twice to confirm the programming.
REMOTE CONTROLS
16
REMOTE CONTROLS
To return to original state: if you wish to restore the PVR channel control in TV mode, repeat the above
steps by pressing CBL in Step 3.
To return to original state: If you wish to restore the TV volume control in CBL mode, repeat the above
steps by pressing TV in Step 3.