Motorola T7100 - Manual (Page 19)

Changing your Radio’
s Settings
Note: Your radio will only communicate with radios set to the same Channel
and Interference Eliminator Code.
Changing your Radio’s Settings
Setting the Channel
• Turn radio On.
• To set, press once the Channel display begins to flash.
• Then press or to choose the Channel.
• Press to exit this menu.
Note: The red indicator light above the display flashes every
second when the Channel is in use.
Setting the Interference Eliminator Code
The Interference Eliminator Code helps minimize interfer-
ence by providing you with a choice of code combinations.
• Turn radio On.
• To set, press twice the Code display begins to flash.
• Then press or to choose the Code.
• Press to exit this menu.
Note: To hear everyone on your Channel, or to communicate with a radio
that does not have Interference Eliminator Codes, select Interference
Eliminator Code .
18