MicroNet Technology SP907NL - Manual (Page 23)

20
to the access point. Otherwise, users can press refresh button to rescan access
points. Select the access point if it’s shown, then click <Connect>.
Step 6. If the wireless access point uses encryption, users will have to input the
correct WEP passphrase or WPA pre-shared key. Ensure both the AP and PC
is set with the same WEP passphrase/WPA pre-shared key. Otherwise the
wireless connection will fail to establish.
If the access point selected does not use encryption, users will not be prompted
for security key or passphrase.
Step 7. If users can see this message, the connection between the computer
and wireless access point is successfully established.