Maxtor 10K V - Manual (Page 188)

5-130 Maxtor Atlas 10K V
0x05
Illegal Request
0x1A 0x00 Parameter list length error
0x20 0x00 Invalid command.
0x20 0xFE ETM can't run with motor spinning
0x20 0xFF Selfscan code not loaded or bad
0x21 0x00 Invalid LBA
0x24 0x00 Invalid bits set in CDB
0x25 0x00 Invalid LUN specified
0x26 0x00 Invalid fields in parameters
0x26 0x02 Bad fields in parameters
0x26 0x04 Invalid release of persistent reservation
0x26 0x80 Invalid Code image checksum failed
0x26 0x81 Incorrect product code loaded
0x26 0x82 Invalid Offset for image
0x26 0x83 Invalid ASIC for this code load
0x26 0x84 Invalid Code image - New PCBA cannot take old code
0x2C 0x00 Invalid command sequence
0x3D 0x00 Invalid bit set in identify message
0x84 0x01 Aborted b/c of internal TO DER of a cmd other than current
0x84 0x10 Aborted b/c of internal TO before going to BBR for cur cmd
0x84 0x11 Aborted b/c of internal TO BBR of a cmd other than current
Sense
Key
Sense
Code
Sense
Qualifier
Meaning