Connecting a dvd player or other s-video device, Dvd player/video game with component video, Other s-video device – MITSUBISHI ELECTRIC LT-2220/LT-3020 User Manual

Page 18: Y to y, Cb or pb to pb, Figure 9), Figure 10)

Advertising

DVD Player/Video Game with

Component Video

(Figure 9)

1. Connect the Component Video cables from

(YCb Cr or YPbPr) VIDEO OUT on the back of

the DVD player to COMPONENT (1 or 2) on

the TV side panel. The correct connections are:

Y to Y

Cb or Pb to Pb

Cr or Pr to Pr

2. Connect a set of audio cables from AUDIO OUT

on the back of the DVD player to COMPONENT

AUDIO Input (1 or 2) on the TV side panel.

• The red cable connects to the R (right)channel

• The white cable connects to the L (left) channel

NOTE:

Some video game systems support component

connections. Please refer to your video game

console Owner’s Guide.

NOTE:

If your DVD player supports progressive

scan playback, be sure to set your player

accordingly. Please refer to your DVD player’s

Owner’s Guide.

Other S-Video Device

(Figure 10)

1. Connect an S-Video cable from VIDEO OUT

on the device back panel to VIDEO INPUT-1 or

INPUT-2 on the TV side panel.

2. Connect a set of audio cables from AUDIO OUT

on the device back panel to AUDIO INPUT-1 or

INPUT-2 on the TV side panel.

• The red cable connects to the R (right) channel

• The white cable connects to the L (left) channel

If your S-Video Device is mono (non-stereo), connect

only the white (left) cable.

See Appendix B, page 58, for component video

signal compatibility information.

For digital audio connections, see your DVD

and A/V receiver Owner’s Guides.

Figure 9. Connecting a DVD Player with Component Video.

Figure 10. Connecting an S-Video Device.

Connecting a DVD Player or Other S-Video Device

Note: The TV side panel and connections shown here are for reference only and may vary by model.

��

�

��

�

��

��
��

��

��
��
��

��

�

��

�

�
�

�

��

�
�

�

��

�

��

�

LCD Monitor 5 8 03.indd

5/8/2003, 3:02 PM

Advertising