Radio operation – Memorex MPD8859 User Manual
Page 7
6
RADIO OPERATION
Set the VOLUME control
1
to minimum
and plug the headphones into the
PHONES jack. Press the PLAY/PAUSE
(
®p
)/POWER ON button
2
to turn the
unit on.
1
2
1
TO LISTEN TO THE RADIO
Slide the FUNCTION switch
1
to the RADIO
position. Press the MENU/ESP/BAND
button
2
to select a band (AM or FM). If
listening to FM, press the MODE/
➛
button
3
to select Stereo or Mono.
3
2
1
2
Press and release the Skip/TUNING DN
o 1
or UP
n 2
button to tune a station.
Press and hold the Skip/TUNING DN
o
1
or UP
n 2
button for rapid search
tuning.
2
1
3
Adjust the VOLUME control
1
and DBBS
switch
2
as desired. If FM STEREO
reception is weak/noisy, press the
MODE/
➛☎
button
3
to Mono, in this case
the reception will be monaural.
2
3
1
4
To turn the radio off, press the STOP
(
■
)/POWER OFF button.
5
ANTENNAS
AM – This unit has a built-in ferrite bar
antenna, which provides adequate reception
in most areas. If reception is weak, turn the
unit to improve reception.
FM – The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.
AUTO SCAN
Press and hold the Skip/TUNING DN
o
or
UP
n
button for approximately 1 second and
the unit will automatically search for the next
available station.