Miele TOUCHTRONIC T 9822 - Manual (Page 23)

Exhaust connection with a
flexible exhaust hose or rigid
pipe
Using the adapter supplied, an
exhaust hose (4" [100 mm]
diameter) can be installed.
Necessary materials:
– a wall or window duct
(available from Miele)
– an exhaust hose made of approved
non-flammable material
^ Install the required adapter* 1 with
the exhaust hose or pipe 2 to the
dryer.
* The white adapter with clips is
used for connection to a hose; the
gray adapter without clips is used
for connection to a pipe.
,
WARNING
Do not remove the restriction insert
in the vent opening. It may result in
poor drying results, damage to the
laundry and higher Carbon
monoxide emissions.
The exhaust duct must not be
connected or secured with screws
or other fastening devices which
extend into the interior of the duct.
Exhaust connection on left or right
^ Place the restriction insert 1 into the
adapter 2.
Ducting
23