Microsoft C4500 - Manual (Page 106)

Adding paper, Toner and Staples
98
6
Adding Staples
This section explains what to do when staples need replacing.
R CAUTION:
Important
❒ Stapling failures or jams may occur if you use a staple cartridge other than
that recommended.
Refill the stapler according to the finisher type. (Check the type if you are un-
sure.) For details about type of finisher, see “Options”, About This Machine.
SR790
The following procedure explains how to add staples to the SR790.
Note
❒ If you cannot pull out the upper unit, there are staples remaining inside the
cartridge. Use all the staples, do not add more.
• Keep your hands clear of the booklet finisher tray when pulling out or push-
ing in the finisher's staple unit. You can trap your fingers if you do not.
AQE904S