Mazda 2006 SPEED6 - Manual (Page 47)

Black plate (47,1)
qLATCH Child-Restraint System
Installation Procedure (Rear
Outboard Seats)
1. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
NOTE
The markings above the LATCH lower
anchors indicate the locations of
LATCH lower anchors for the
attachment of a child-restraint system.
2. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction.
3. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety, please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
Anchor bracket location
Tether strap position
Anchor
bracket
Tether
strap
Essential Safety Equipment
Child Restraint
2-35
Mazdaspeed6_8U01-EA-05H_Edition1 Page47
Thursday, July 7 2005 1:2 PM
Form No.8U01-EA-05H