Rts line state, Beep on <bel, Rts line state -14 beep on <bel> -14 – Motorola LS1203 User Manual
Page 84
Advertising
6 - 14 Symbol LS1203 Product Reference Guide
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High
RTS line state.
Beep on <BEL>
When this parameter is enabled, the scanner issues a beep when a <BEL> character is detected on the RS-232
serial line. <BEL> is issued to gain a user's attention to an illegal entry or other important event.
*
Host: Low RTS
Host: High RTS
Beep On <BEL> Character
(Enable)
*
Do Not Beep On <BEL> Character
(Disable)
Advertising