Marantz CC4001 - Manual (Page 19)

16
ENGLISH
CHANGE PROGRAMMED TRACKS
(example)
When tracks 3, 5, and 7 of disc 1 are programmed,
change track 5 of disc 1 to track 7 of disc 3.
1. To check the program, press RECALL button
on the remote control unit twice while the unit
is stopped to display track 5 of the disc 1.
DISC
PROGRAM
TRACK
CD
7
3 5 SEC MIN
1
2
3
4
5
DISC R PROGRAM TRACK MP3 CD 1
6
11
16 2
7
12
17 3
8
13
18 4
9
14
19 5
10
15
20 RANDOM REPEAT 1DISC SEC MIN TOTAL
EACH
REMAIN
1 2 3 4 5
5 DISC CD CHANGER CC4001
POWER ON/STANDBY STANDBY
OPEN/CLOSE
REPEAT
LEVEL
PHONES
RANDOM
PLAY STOP PAUSE
DISC SKIP 1 2 3 4 5
2. 2. 3.
REMOTE CONTROLLER
RC4001CC
STANDBY ON
OPEN/CLOSE TIME
PROGRAM
RANDOM
DISC 1 DISC 2 DISC 3
DISC 4 DISC 5
AMS REPEAT
RECALL
DIMMER
1 2 3
4 5 6
7 8 9
0
3.
1.
4.
3.
2.
CHECK THE PROGRAM
Press RECALL button on the remote control unit in
the Program mode (when PROGRAM is blinking or
lights).
• Each time RECALL button is pressed the
programmed tracks are displayed one by one.
REMOTE CONTROLLER RC4001CC
STANDBY ON
OPEN/CLOSE TIME
PROGRAM
RANDOM
DISC 1 DISC 2 DISC 3
DISC 4 DISC 5
AMS REPEAT
RECALL
DIMMER
1 2 3
4 5 6
7 8 9
0 RECALL
↓
• The programmed track numbers and total
playing time of the programmed tracks are
repeatedly displayed for approx. 15 seconds.
• When the track number is chosen with
pressing the Numerical button on the remote
control unit directly, the chosen track is
registered automatically;
PROGRAM button
does not need to be pressed.
↓
• If the total playback time of the tracks
programmed exceeds 99 minutes 59 seconds,
“
-- : -- ” is displayed.
• When a program is setup with an MP3 disc, “ --
: -- ” is displayed for the total time.
• When the tracks of a disc that is not selected is
programmed, the total playing time of such
tracks is displayed as “
-- : -- ”.
5. To program multiple tracks, repeat the step 2.
to 4. to program all tracks to play.
6. Press 3 PLAY button on the main unit or
remote control unit to start the program play.
DISC
PROGRAM
TRACK
CD
7
13
5
10
SEC MIN
1
2
3
4
5
1
DISC
PROGRAM
TRACK
CD
7
SEC MIN
1
2
3
4
5
BACK TO NORMAL PLAY
WITHOUT CLEARING PROGRAM
To go back to normal play without clearing the
program while playing the program, do one of the
followings:
• Press PROGRAM button.
Normal play will be started from the playing
track.
• Press Disc Select button on the main unit or
remote control unit.
Normal play will start from the first track of the
chosen disc.
• Press the Numerical button on the remote
control unit.
Normal play will start from the chosen track.
To go back to program play again, press
PROGRAM button while the main unit is stopped,
and press 3 PLAY button.
DISC R PROGRAM TRACK MP3 CD 1
6
11
16 2
7
12
17 3
8
13
18 4
9
14
19 5
10
15
20 RANDOM REPEAT 1DISC SEC MIN TOTAL
EACH
REMAIN
1 2 3 4 5
5 DISC CD CHANGER CC4001
POWER ON/STANDBY STANDBY
OPEN/CLOSE
REPEAT
LEVEL
PHONES
RANDOM
PLAY STOP PAUSE
DISC SKIP 1 2 3 4 5
REMOTE CONTROLLER
RC4001CC
STANDBY ON
OPEN/CLOSE TIME
PROGRAM
RANDOM
DISC 1 DISC 2 DISC 3
DISC 4 DISC 5
AMS REPEAT
RECALL
DIMMER
1 2 3
4 5 6
7 8 9
0
PROGRAM
0-9
DISC1-5
3 PLAY
DISC1-5 3 PLAY
Total number of programs Total playback time of
the tracks programmed
Total playback time of
the tracks programmed