MITSUBISHI ELECTRIC WD-57833 - Manual (Page 28)

28 4. TV Operation and Features
1. POWER: Turns TV power on and off.
2. Slide Switch: Selects the A/V device to be oper-
ated by the remote control. Set the slide switch to
TV for operation of the TV, NetCommand-controlled
devices, and IEEE 1394 devices. Control of addi-
tional devices requires programing (see Appendix D,
“Programming the Remote Control.”
3. SLEEP: Sets the TV to turn off within 2 hours.
4. Digits/Letters: Press digits for channel numbers,
then press ENTER for faster tuning. Use numbers and
the
—
CANCEL key to enter digital sub-channel numbers.
Use also for entering letters or names in menus.
To select letters when naming channels, repeatedly
press the associated number key. Press ENTER to set
the letter. Special characters are available with the 1
key (!, &, blank space) and 0 key (/, *, -).
5. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears Fav and some
menu entries.
6. QV (QuickView ™ ): Switches between the current
channel and the last channel viewed.
7. MUTE: Turns TV sound on and off.
8. SPLIT: Turns Split Screen mode on and off.
9. FAV (Favorites): Scans through memorized lists of
favorite channels. See “Setup Menu” in chapter 5,
“TV Menu Settings,” for more information.
10. VOL / (Volume Up/Down): Changes sound
level.
11. CH/PAGE / (Channel or Page Up/Down):
Scans up or down through memorized channels.
Pages up and down through screens when used with
the TV Guide On Screen system or ChannelView
™ .
12. FORMAT: Changes the shape and size of the TV
picture. When in Split Screen mode, changes
the size of the split images while maintaining their
aspect ratios.
13. LIST: Works like the LIST key for a cable box or satellite
receiver when “learned” for NetCommand or when
the remote has been programmed for the device.
14. INPUT: Displays the Input Selection menu from
which you can select an input source to view, such
as an antenna input (
ANT 1/2) or a connected
device.
15. (Adjust Up/Down/Left/Right): Navigate
menus and change settings.
16. ENTER: Selects a channel number or menu item.
17. GUIDE: Displays or removes ChannelView
™ channel
listing for ANT 1 and ANT 2. With the TV Guide
On Screen system enabled, launches TV Guide
On Screen. Displays DVD disc or top menu for a
NetCommand-controlled DVD player.
Remote Control
18. INFO: Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip ratings information. See
chapter 4, “TV Operation and Features,” for details.
19. AUDIO: Selects individual audio settings to adjust.
20. VIDEO: Selects individual video settings to adjust.
21. MENU: Displays the main TV menu. When a sub-
menu is open, backs up one menu level.
22. EXIT: Closes TV on-screen menus/displays.
23
29
11
2
3
4
5
7
8
10
25 24
27 28
26
17
18
9
12
13
14
15
1
6
16
19
20
22
21