Oven cooking, Timer, Locking the controls – Maytag 500 Series User Manual

Page 11: Fault codes, Baking

Advertising
background image

10

Oven Cooking

Timer

The timer can be set from one minute (0:01) up to 99 hours
and 59 minutes (99:59).

The timer can be used independently of any other oven
activity. It can also be set while another oven function is
operating.

The timer does not control the oven. It only controls a beeper.

To set the Timer:

1. Press the Timer pad.

• 0:00 lights in the display.

• The colon flashes in the display.

2. Press the More+ or Less- pad until the

correct time appears in the display.

• The colon will continue to flash.

3. Press Timer pad again or wait four seconds.

• The colon continues flashing and the time begins

counting down.

• The last minute of the timer countdown will be displayed

as seconds.

4. At the end of the set time, one long beep will sound.

To cancel the Timer:

1. Press and hold the Timer pad for three seconds.

OR

2. Press the Timer pad and set the time to 0:00.

Locking the Controls

The touchpad controls can be locked for safety, cleaning, or
to prevent unwanted use. They will not function when locked.

If the oven is currently in use, the controls and door cannot be
locked.

The current time of day will remain in the display when the
controls are locked.

To lock:

Press and hold the CANCEL and Cook &
Hold
pads for three seconds. (Press
CANCEL pad first.)

LOCK flashes in the display.

To unlock:

Press and hold the CANCEL and Cook & Hold pads for three
seconds. (Press CANCEL pad first.)

LOCK disappears from the display.

Fault Codes

BAKE or LOCK may flash rapidly in the display to alert you if
there is an error or a problem. If BAKE or LOCK flash in the
display, press CANCEL pad. If BAKE or LOCK continue to
flash, disconnect power to the appliance. Wait a few minutes,
and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized
servicer.

To cancel the Clock display:

If you do not want the time of day to display:

Press and hold the CANCEL and Clock
pads for three seconds. The time of day
will disappear from the display

When the clock display is canceled, press
the Clock pad to briefly display the time
of day.

To restore the Clock display:

Press and hold the CANCEL and Clock pads for three
seconds. The time of day will reappear in the display.

Baking

To set Bake:

1. Press the Bake pad.

• BAKE will flash.

• 000 will light in the display.

2. Select the oven temperature. The oven

temperature can be set from 170° to 550°. Press
or press and hold the More+ or Less- pads.

• 350° will light when either pad is first pressed.

• Press the More+ pad to increase the temperature.

• Press the Less- pad to decrease the temperature.

3. Press Bake pad again or wait four seconds.

• BAKE will stop flashing and light in the display.

• 100° or the actual oven temperature will display. The

temperature will rise in 5° increments until the preset
temperature is reached.

4. Allow the oven to preheat for 8-15 minutes.

• When the set oven temperature is reached, one long

beep will sound.

• To recall the set temperature during preheat, press the

Bake pad.

5. Place food in the oven.

Cont.

Advertising