Other functions, English, Sleep timer – Marantz LC3050 User Manual
Page 12: Sound output selection, Pip function, Viewing the pip picture, Selecting the pip picture mode, Moving the pip picture, Switching the main and pip picture, Viewing the external source input
8
ENGLISH
OTHER FUNCTIONS
Sleep timer
You don’t have to remember to switch the set off before
you go to sleep. The sleep timer automatically switches
the set to standby after the preset time elapses.
Press the
button to select the number of minutes. The
display will appear on the screen, followed by
0
,
10
,
20
,
30, 60
,
90
,
120
,
180
and
240
. The timer begins to count
down from the number of minutes selected.
Note:
a. To view the remaining sleep time, press the
button
once.
b. To cancel the sleep time, Select 0 with the
button.
Sound output selection
In VIDEO mode, you can select output sound for the left and
right loudspeakers. Repeatedly press the
I-II
button to select
the sound output.
L+R
: Audio signal from audio L input is sent to left
loudspeaker and audio signal from audio R input is sent
to right loudspeaker.
L+L
: Audio signal from audio L input is sent to left and right
loudspeakers.
R+R
: Audio signal from audio R input is sent to left and right
loudspeakers.
PIP function
PIP will let you view two separate source inputs on your TV
screen at the same time.
Viewing the PIP picture
Press the
PIP
button. (Press the PIP button again, to turn
PIP off.)
Selecting the PIP picture mode
Press the
button to adjust the PIP picture mode.
Each press the
button, selects the
16:1
,
9:1
,
double
window
and
multi picture mode
. ( Multi picture mode is
just available when the main picture is in AV mode.)
Moving the PIP picture
Press the
button to adjust the position of sub picture in
PIP mode.
Switching the main and PIP picture
Press the
button to switch the main and sub picture in
PIP mode.
Viewing the external source input
Press the
button to select the input source of sub picture in PIP mode.
Press the
CH
5∞
button to select the programme desired in TV mode of sub
picture.
0
OTHER FUNCTIONS
Calling the programme list
You can check the programmes stored in the memory
by displaying the programme list.
Displaying programme list
1. Press the
LIST/
button to display the
Programme
list
menu in TV mdoe. The programme list appears on
the screen.
One programme list contains ten programmes as right.
Note :
a. You may find some blue programmes.
They have been set up to be skipped by auto
programming or in the programme edit mode.
b. Some programmes with the channel number
shown in the programme list indicate there is no
station name assigned.
Selecting a programme in the programme list
Select a progranne with the
5∞
or
2 3
button.
Then press the
OK
button.
The set switches to the chosen programme number.
Paging through a programme list
There are 10 programme table pages in which contain
100 programmes.
Pressing the
5∞
or
2 3
button repeatedly turns
the pages.
5∞ 23 OK MENU TV/AV
Programme list
0 ----- 5
1
6
2 7
3 8 -----
4 9 -----
RC3050LC
P P
LIST
TV/AV
TV/PC
OK
MUTE
CH
MENU
R
G
Y
B
VOL.
1
2
3
4
5
6
7
8
PIP
0
9
CH
OK
RC3050LC
P P
LIST
TV/AV
TV/PC
OK
MUTE
CH
MENU
R
G
Y
B
VOL.
1
2
3
4
5
6
7
8
PIP
0
9
CH
OK