M-AUDIO Music Mixer - Manual (Page 9)

10
Installing The Evolution Librarian Software
1. Insert the X-Session Installer CD-ROM in to your CD-ROM drive.
2. Click on “Librarian Installer”
3. Follow the on-screen instructions to complete the installation process
Once the installation has been completed, launch the program. The following is a screenshot of what you should be seeing on your monitor.
Setting Up The Librarian Software
Before you start using the Librarian, check that the X-Session has been selected as input and output device.
1. Select MIDI Setup from the Options menu.
2. Ensure the USB driver for your Evolution X-Session - is selected in the “Inputs” Column. If you are using native drivers this may be named
“USB Audio Device”.
3. In the “Outputs” column, select the USB driver for your Evolution X-Session If you are using native drivers this may be named “USB
Audio Device”.
You should now be ready to use the Librarian software with you Evolution X-Session.
Librarian Overview
As you can see from the screenshot of the Librarian (top of this page), you can save, load, receive or send the complete content to and from
either Bank columns.
To transmit the complete content of your Evolution X-Session to the librarian, simply press the “Receive” button on the Librarian software.
This process can only be completed successfully if the USB drivers for your X-Session have been selected correctly, as described in the “Setting
Up The Librarian Software” section.
Once you have Received data from the X-Session, the memories are displayed in the column.
Organizing Presets Received From A Device
You can name the memories as you like. To re-name a memory, double-click on the memory. You can then move memories around by dragging
them to a new position, or using the copy buttons between the two windows.
These buttons are defined below:
Will copy the selected memory in Bank 2 to Bank 1.
Will copy the selected memory in Bank 1 to Bank 2.
Will copy all memories in Bank 2 to Bank 1.
Will copy all the memories in Bank 1 to Bank 2.
Will undo the last copy you made. Only the last copy is remembered.
It’s a good idea to decide which column is your master column, to avoid confusion and maybe loosing hours of work.
Viewing The Contents Of A Memory
Right-click on a memory to view the contents. Please note that it is not possible to the contents of a memory. The Sys Ex librarian will simply allow
you to rearrange the order of memories, or copy memories between one memory dump and another.
1
2
• The Evolution Librarian Software